menu
At Sanalife, we believe it's imperative to offer our customers solutions that improve indoor environments that promote health and wellness. ActivePure® is the leading purification technology to reduce harmful contaminants in the air and on surfaces. The technology has a proven track record and is supported by exhaustive testing both laboratory studies and real-world settings.*
*The application of ActivePure® should complement existing regulatory guidelines for sanitization and disinfection and not replace them.
Testing of the SARS-CoV-2 virus was completed in August 2020 (surface) and in December 2020 (airborne). The results of the laboratory testing revealed extraordinary reduction levels of the virus that causes COVID-19.
New Pure & Clean Unit Testing
Testing done at a 3rd party unaffiliated laboratory with no connection to ActivePure or its affiliates.
Aerus Hydroxyl Blaster with ActivePure® Technology Unit Testing.
Testing was done at MRIGlobal, a 3rd party unaffiliated laboratory with no connection to ActivePure or its affiliates. The reduction percentages were measured incrementally over natural degradation of SARS-CoV-2. Outside of control group - over 99.9% reduction of the SARS-CoV-2 virus.
New ActivePure® Medical Unit Testing.
Results are based on laboratory testing conducted to demonstrate the use of ActivePure® Technology in substantially reducing airborne contaminants. Field results may vary based on environmental conditions. These results have not been evaluated by the FDA.
New ActivePure® Medical Unit Testing.
Testing done at Aerosol Research and Engineering Laboratories, a 3rd party unaffiliated laboratory with no connection to ActivePure or its affiliates. Net Log Reduction of MS2 Bacteriophage Virus Bioaerosol.
New ActivePure® Medical Unit Testing.
Testing done at Aerosol Research and Engineering Laboratories, a 3rd party unaffiliated laboratory with no connection to ActivePure or its affiliates. Net Log Reduction Phi-X174 of Bacteriophage Virus Bioaerosol.
New ActivePure® Medical Unit Testing.
Results are based on laboratory testing conducted to demonstrate the use of ActivePure® Technology in substantially reducing airborne contaminants. Field results may vary based on environmental conditions. These results have not been evaluated by the FDA.
Aerus Beyond Guardian Unit Testing.
Testing done at Danish Technological Institute, a 3rd party unaffiliated laboratory with no connection to ActivePure or its affiliates. Testing was completed with the air purifier installed within a seal 20 cubic meter room. Experiment was designed to measure the reduction rate during use.
Aerus Beyond Guardian Unit Testing.
Testing done at Danish Technological Institute, a 3rd party unaffiliated laboratory with no connection to ActivePure or its affiliates. Testing was completed with the air purifier installed within a seal 20 cubic meter room. Experiment was designed to measure the reduction rate during use.
Aerus Beyond Guardian Unit Testing.
Testing done at Danish Technological Institute, a 3rd party unaffiliated laboratory with no connection to ActivePure or its affiliates.Testing was completed with the air purifier installed within a seal 20 cubic meter room. Experiment was designed to measure the reduction rate during use.
Results are based on testing conducted using ActivePure® Technology within a Hotel Facility. The results are combined from testing conducted within 3 rooms.
Results are based on testing conducted using ActivePure® Technology within a Hotel Facility. The results are combined from testing conducted within 3 rooms.
New ActivePure® Medical Unit Testing.
Testing done at Aerosol Research and Engineering Laboratories, a 3rd party unaffiliated laboratory with no connection to ActivePure or its affiliates. Net Log Reduction of Aspergillus Niger (fungal spores).
New ActivePure® Medical Unit Testing.
Testing done at Aerosol Research and Engineering Laboratories, a 3rd party unaffiliated laboratory with no connection to ActivePure or its affiliates. Net Log Reduction of Staphylococcus Epidermidis Bioaerosol.
New ActivePure® Medical Unit Testing.
Testing done at Aerosol Research and Engineering Laboratories, a 3rd party unaffiliated laboratory with no connection to ActivePure or its affiliates. Net Log Erwinia Reduction of Bacillus Globigii (bacterial spores).
ActivePure® Technology is an active purification technology that puts back into the air the same therapeutic molecules that make our outdoor air safe – molecules that actively neutralize pathogens and volatile organic compounds (VOCs) as they enter the space. ActivePure® provides a layer of protection that reduces airborne and surface pathogens quickly and effectively.
